8-port fast industrial PoE switch

Overview

The SmartByte LT-IS3008FP-2FX6TX is the unmanaged industrial grade PoE switch with 6-port 10/100Base-TX PoE and 2-port 100Base-FX fiber optical interfaces. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, it is featuring with port isolation, 250m long distance transmission mode, QoS(1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.

LT-IS3008FP-2FX6TX is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40℃ ~+75℃ as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.

Features

➢ 6*10/100Base-TX RJ45 PoE ports, 2*100Base-FX SFP ports(SC/ST/FC optional)

➢ DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection

➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard

➢ Powerful Dip switch function: 1.Port isolation; 2. 250m long distance; 3. QoS; 4.PoE watchdog

➢ Support 9K Bytes Jumbo frame

➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection

➢ IP40 fan-less and Din-rail hardware design

➢ Operation temperature: -40 ℃ ~+75℃

Model No.	LT-IS3008FP-2FX6TX
Interface	Fiber ports		Copper RJ45 ports
	2		6
Ethernet	610/100Base-TX PoE 2100Base-FX SFP(SC/ST/FC optional)
Standard	IEEE 802.310Base-TEthernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE
Dip Switch	1. Port Isolation 2. 250m long distance mode 3. QoS(1-2 ports） 4. PoE watchdog
LED Indicators	P(Power indicator)Green	Off: the device is power off or failed
		On: the device power on is normal
	S(PoE usage indicator)Red	Off: total PoE usage＜rated 50%
		Blinking: rated 50%＜total PoE usage＜rated 90%
		On: total PoE usage≥rated 90%
	1-6(Copper ports)	Green indicators		Yellow indicators
		Off: ports link down		Off: PoE not working
		On: ports link up		On: PoE working
		Blinking:data on TX/RX
	7-8 ( Fiber ports)Green	Off: ports link down
		On: ports link up
		Blinking:data on TX/RX
Power parameters
Input voltage	44-57VDC, redundant power input
Input current	4.5A Max
Total power consumption	Full loading without PoE ≤4W PoE power budget ≤ 180W
Connector	Removable 4-pin terminal block
Reverse polarity protection	Support
Over-voltage protection	Support
Switching features
Switching capacity	1.6G
Packet forwarding rate	2.38Mpps
MAC address table	2K
VLAN	2K
Buffer	2Kbits
Forwarding delay	<100us
Jumbo Frame	Support 9Kbytes
MDX/MIDX	Support
Watchdog	Support
Network Topology
Star topology	Support
Bus topology	Support
Tree Topology	Support
Mechanical structure
Case protection	IP40
Installation method	Din-rail
Dimension(WDH)mm	309898mm
Weight	0.6 kg
Operating environment
Operating temperature	-40℃~+75℃
Storage/transportation temperature	-40℃~+85℃
Relative humidity	5%~95%（non-condensing）
Industrial Standard	Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us)
	Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us)
	DIP: IEC 61000-4-11 Level 3（10V）
	ESD: IEC 61000-4-2 Level 4（8K/15K）
	Shock：IEC 60068-2-27
	Free fall：IEC 60068-2-32
	Vibration：IEC 60068-2-6
Certification	CCC/CE/FCC/RoHS
Warranty	5 years

LT-IS3008FP-2FX6TX datasheet

Model	Description
LT-IS3008FP-2FX6TX	10/100Base-TX to 100Base-FX unmanaged industrial PoE switch with 610/100Base-TX PoE ports and 2100Base-FX SFP slots, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃
LT-IS3008FP-2FX6TX-SC/ST/FC	10/100Base-TX to 100Base-FX unmanaged industrial PoE switch with 610/100Base-TX PoE ports and 2100Base-FX SC/ST/FC ports, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃

Unmanaged Industrial PoE Switches

610/100Base-TX PoE + 2100Base-FX Industrial PoE Switch

Unmanaged Industrial PoE Switches

6*10/100Base-TX PoE + 2*100Base-FX Industrial PoE Switch

610/100Base-TX PoE + 2100Base-FX Industrial PoE Switch